Remote Control: It is seen that if the remote controls of TV, air conditioner, music system, remote control ceiling fan and other devices in the house get completely or partially damaged after a few years of use. After pressing the remote several times, they are able to give commands and only then your device works. However, most people have no idea about why this happens and how this problem can be fixed. If you also want to revive the damaged remote controls in your house, then today we are going to tell you about some important tips which can be very useful for you.
 "5 tips can give new life to the remote from TV to AC and fans, they will start working like new. 1")
First of all, check whether the battery is properly installed in the remote or not. If the battery is loose or damaged, replace it. Not only this, this problem can be solved by cleaning the battery terminals also.
 "5 tips can give new life to the remote from TV to AC and fans, they will start working like new. 2")
If all the above tips do not work, you will need to replace the remote. You can buy the remote online or from electronics stores.
 "5 tips can give new life to the remote from TV to AC and fans, they will start working like new. 3")
If the above tips don’t work, you can try resetting the remote. To reset the remote, press and hold the ‘Reset’ button on the remote for a few seconds.
 "5 tips can give new life to the remote from TV to AC and fans, they will start working like new.")
If dirt accumulates on the IR (infrared blaster) of the remote, it will not be able to transmit the signal, in such a situation, to clean it thoroughly, take a slightly dry soft cloth and clean the IR blaster with it. The IR blaster is the small red or black part on the front of the remote.
 "5 tips can give new life to the remote from TV to AC and fans, they will start working like new. 5")
To clean the remote, slightly moisten a soft cloth and use it to clean all the buttons and surfaces of the remote. You can also use rubbing alcohol to clean the remote. In this way the dirt accumulated in the remote can be cleaned thoroughly.